LED FLOODLIGHT INSTALLATION TIPS AND PRECAUTIONS.

March 20, 2017

LED floodlight installation tips and precautions.

First, the steps
1, install the guardrail, punch holes in the wall, the spacing according to the actual requirements, generally within 3 cm
2, do anti-static measures, such as the workbench should be grounded, workers wear the corresponding electrostatic clothing, anti-static measures, because different grades of LED floodlights of different quality, the anti-static ability is different
3, installation attention to sealing, poor sealing, directly affect the service life of LED floodlights
4, LED floodlight wiring is best not to exceed 25 cm, the transformer power can be relatively long, otherwise, it will affect the brightness
the installation notes
1, try to use the series LED form because the LED floodlight voltage difference is special. The peak current of ordinary LED is maintained at 80 mA, and the reverse voltage is above and below 6V. When designing the circuit, pay attention to the peak voltage and current at this extreme value.
2, the welding voltage is less than 25 watts, the soldering iron only controls the bare SMD LED under the high temperature of 300 degrees Celsius, do not squeeze its epoxy part, or wipe with a hard object, because the LED lamp is very fragile Very easy to damage, welding time is 3 seconds. LED floodlights are widely used, so the installation tips and precautions are very important.