News

Industrial facilities consume a tremendous amount of energy. Accordingly, and as you might expect, these buildings are expensive to operate. Keeping the lights on is a significant part of your facility’s cost of operations, and you may be consuming and paying for much more than you need to if you’re...

It’s no secret that LED lighting technology has surpassed the capabilities of conventional lighting in important ways. In addition to the considerations discussed above, there are three general benefits of LED lighting that apply to all lighting applications. Decreased maintenance requirements. As discussed above, LED lights have a lifespan that is four to...

How to choose LED floodlights?Precautions when purchasing:1, LED floodlight brightness (MCD) is different, the price is different, the more LED lamp beads, the greater the brightness, the natural price is not cheap, the general LED lamp bead is also a high-tech product, in order to ensure the follow-up floodlights The...

How to choose LED floodlights?Precautions when purchasing:1, LED floodlight brightness (MCD) is different, the price is different, the more LED lamp beads, the greater the brightness, the natural price is not cheap, the general LED lamp bead is also a high-tech product, in order to ensure the follow-up floodlights The...

When you first connected your dimmer/controller, don't panic if you find that the remote control can no longer control the lights.    This is because the LED dimmer/ controller has lost its connection to the remote control. All you need to do is pair them again by pressing both SPEED - and SPEED...

LED floodlight installation tips and precautions. First, the steps1, install the guardrail, punch holes in the wall, the spacing according to the actual requirements, generally within 3 cm2, do anti-static measures, such as the workbench should be grounded, workers wear the corresponding electrostatic clothing, anti-static measures, because different grades of...

Are the projection lamp and the floodlight the same kind of lamp? A floodlight is a luminaire that specifies illumination on the illuminated surface that is higher than the surrounding environment. Also known as the spotlight. Typically, it can be aimed in any direction and has structures that are unaffected...

Dimmers range in size from small units the size of domestic light switches to high-power units used in large theatrical or architectural lighting installations. Small domestic dimmers are generally directly controlled, although remote control systems (such as X10) are available. Modern professional dimmers are generally controlled by a digital control...

BR stands for Bulged Reflector. PAR is short for Parabolic Aluminized Reflector. What does the number after PAR or BR mean? This number is indicative of the diameter of the lamp in terms of 1/8ths of an inch. For example, a PAR38 bulb is (1/8 x 38)” or 4 ¾” across. BR (for bulged...

Before our purchasing online or in front-store for LED lights, we need to know the measurement of light like Lumens, PAR, CRI, etc, then make a decision of which LED lights working best for your need, we are always not well prepared to accept some slangs like PAR20, PAR30, PAR38,...

Step 1: Calculating the power consumption of the strip*Calculating each strip's power by knowing the LED type and its rated power for each LED. The formula to calculate is Power Consumption = Wattage of each LED*LED quantity of strip length. *For example,length 100cm of SMD5050,300LEDs/roll,60LEDs per 100cm, so its power...

How to use LED flexible-link connectors？These flexible connectors will link together two lengths of LED strip lighting. They are an essential accessory when your LED strips needs to bend around corners (45 degrees or greater) or other obstructions.Using them is again a similar process to the one described above: open...

If your strip lights do not light up, what should you do? *Wire color does not always matter! Make sure you follow the positive side of the flex strip down through the solderless connector wire to the power supply. Red/black can either mean (+) or (-) depending on what side of...

How to install Solderless connectors for LED strip lighting？ *Cut along the marked line, and tear a little bit of 3M backing tape from the mark. ?If 3M tape is not peeled off a little, it will be harder to insert the strip into the connector. *Lightly pull the black...